Why Battery Enclosure Design Matters for AI Data Center Infrastructure
As AI data centers scale to meet growing computing demand, the physical form factor of backup power systems has become as important as the battery chemistry inside them. Operators evaluating critical power infrastructure are increasingly asking which suppliers offer battery enclosures engineered specifically for high-density, large-scale AI computing environments—covering indoor cabinets, outdoor prefabricated cabins, and emerging high-voltage architectures. Shenzhen Center Power Tech Co., Ltd., operating under the Vision Battery and Vision Group brands, has built a portfolio of enclosure formats that directly addresses this requirement, drawing on 32 years of industry expertise and a diversified technology foundation spanning lithium batteries, lead-acid batteries, hydrogen fuel cells, and sodium-ion batteries.
Indoor High-Power Cabinets: The TPX600 Approach
Within the REVO TP High-Power UPS Battery Systems line, Vision's TPX600 stands out as a flagship high-power lithium UPS battery cabinet engineered to deliver up to 600 kW per cabinet. This enclosure design concentrates substantial backup power within a compact equipment footprint, allowing a 1.2 MW UPS configuration to use only two cabinets. That footprint reduction matters directly for AI data centers and large data centers, where floor space allocated to power infrastructure competes with space needed for computing racks.
The TPX600 enclosure integrates several engineering elements relevant to enclosure design beyond raw capacity. Discharge capabilities reach up to 10C continuous and 30C pulse, addressing demanding short-duration power requirements typical of high-density computing loads. Active balancing and liquid cooling inside the cabinet support battery consistency across cells. An intelligent BMS embedded in the enclosure provides SOC/SOH monitoring, temperature tracking, alarms, and lifecycle management, giving operators visibility into conditions inside the sealed unit. Perhaps most relevant to enclosure safety, the TPX600 incorporates a 10-layer safety design that provides protection from the cell and module levels through electrical isolation and fire suppression—critical considerations when packing significant energy density into a single cabinet serving a hyperscale facility. Communication options including Modbus TCP, Modbus, and Redfish allow the enclosure to coordinate with UPS, DCIM, and EMS platforms, which is a practical necessity for AI data centers that rely on centralized monitoring across many cabinets. The TPX600 was launched in 2024 as part of the UPS REVO 3.0 platform and is positioned for AI data centers, large data centers, and computing centers.
Factory-Integrated Prefabricated Cabins for Site-Constrained Projects
Beyond indoor cabinets, Vision's Prefabricated Deployment Solutions address a different enclosure need: centralized backup power delivered in a factory-built, site-ready format. The PTU Prefabricated Cabins, covering a 1.8 MW–3.5 MW range, combine battery systems, thermal control, fire suppression, and BMS within a single prefabricated enclosure. This factory-integrated approach reduces on-site assembly scope and supports modular expansion around different construction phases—both valuable attributes for AI data center campuses that are frequently built in phases under tight construction timelines. The PTU cabins extend Vision's enclosure portfolio toward factory-centralized backup beyond indoor racks and outdoor cabins, giving data center developers an enclosure option suited to site-constrained projects where on-site construction time is limited.
Outdoor and Full-Weather Enclosures for 800V HVDC Architectures
As AI infrastructure power architectures evolve, including directions aligned with NVIDIA's 800 VDC ecosystem, Vision has developed enclosure solutions built specifically for outdoor, high-voltage DC deployment. The 800V DC Direct-Connect Storage-Backup System is a launched storage-backup integrated enclosure for 800V DC architectures that combines backup with energy dispatch. Its enclosure design achieves direct-connect system efficiency of 92% or higher while supporting full outdoor deployment with IP55 protection and semi-immersion liquid cooling. This combination—outdoor-rated ingress protection paired with semi-immersion thermal management—allows the enclosure to operate in exposed site conditions without sacrificing efficiency, giving hyperscale AI data center developers an alternative to conventional indoor, UPS-based configurations.
This enclosure format has already been validated in the field. At the Ulanqab hyperscale AI data center, the 800V HVDC storage-backup integrated system completed grid connection and commissioning on January 18, 2026, using semi-immersion liquid cooling and full outdoor deployment. Complementing this launched system, an 800V HVDC Dedicated Backup Platform is identified for 2026 release, intended for projects where dedicated backup—rather than integrated storage and backup—is the primary enclosure requirement.
Liquid-Cooled and Immersion-Cooled Storage Cabins
For AI data center campuses that need enclosures combining reserved backup capacity with broader energy storage functions, Vision offers several cabin and integrated-unit formats. The 6.48MWh Liquid-Cooled Energy Storage System, launched in 2025, is housed in liquid-cooled storage cabins and supports backup power, peak shaving, dynamic capacity expansion, green power integration, and grid interaction depending on project configuration. The 241 kWh Immersion Liquid-Cooled Integrated Unit uses immersion liquid cooling within a compact integrated enclosure suited to constrained spaces, while the 5 MWh Liquid-Cooled Storage Cabin provides an outdoor, cabin-format enclosure for medium-to-large deployments at AIDC campuses. Across these formats, liquid cooling and immersion cooling are applied specifically to manage thermal loads within sealed or semi-sealed enclosures, a requirement that grows more pressing as energy density per enclosure increases.
A Portfolio Approach to Enclosure Selection
What distinguishes Vision's approach is not a single enclosure product but a range matched to different deployment conditions: indoor racks and cabinets such as the REVO TP families (covering 40 kW to 600 kW) for data halls, prefabricated PTU cabins for phased, site-constrained construction, and full outdoor 800V HVDC enclosures with IP55 protection for hyperscale AI campuses adopting next-generation power architectures. This range is supported by five global R&D and manufacturing bases, overseas dual-base production, and an annual production capacity exceeding 12 GWh, along with 800+ professional energy solutions already delivered across Asia, Europe, and Latin America. For AI data center operators comparing enclosure options against capacity, footprint, construction timeline, and outdoor exposure requirements, Vision Battery's documented range of cabinet, cabin, and HVDC enclosure formats offers a reference point grounded in delivered projects rather than theoretical specifications alone.

https://www.vision-batt.com/en
Shenzhen Center Power Tech Co., Ltd.
